Print Cartridge Left Guide - Xerox Phaser 4500 Service Manual

FRU Disassembly

Print Cartridge Left Guide

8-40
(PL8.1.15)
J46
1. Print cartridge left guide assembly
2. Fuser connector (P/J 4647)
3. Link lever
Procedure:
1. Remove the fuser assembly (page 8-44).
2. Remove the laser unit shield plate (page 8-39).
3. Remove the fuser harness clamp that secures the fuser harness to the
frame.
4. Remove the rear cover (page 8-6).
5. Remove the transfer chute (page 8-46).
6. P4500: Disconnect P/J142, which connects the 5 V interlock to the LVPS
harness assembly (2-wire gray harness).
P4510: Disconnect P/J141, which connects the 5 V interlock to the laser
unit harness.
7. Remove the LVPS shield plate (page 8-60).
8. Unplug J45 from P45 on the LVPS to disconnect the top cover switch.
1
J45
J47
P/J141
3
P/J4647
6
P4500
P45
P46
P47
P/J142
P45
P4510
4. Gear 3 link
5. LVPS
6. Fuser harness clamp
Phaser 4500/4510 Service Manual
4
5
P46
P47
s4510-115