Xerox Phaser 4500 Service Manual page 133

Phaser 4500/4510 Service Manual
Troubleshooting Procedure (continued)
Steps Actions and Questions
Check feeder harness 5 of the tray 3
2
feeder:
1. Remove Optional 550-Sheet Paper
Feeder.
2. Disconnect P/J84 from the 550-
sheet feeder PWBA.
3. Check the following for continuity:
J84-1 <=> J8483-10
J84-2 <=> J8483-9
J84-3 <=> J8483-8
J84-4 <=> J8483-7
J84-5 <=> J8483-6
Is each continuous?
3 Check feeder harness 2 of the tray 4
feeder:
1. Remove the Optional 550-Sheet
Paper Feeder.
2. Disconnect P/J8483.
3. Check the following for continuity:
J8483-1 <=> J83-10
J8483-2 <=> J83-9
J8483-3 <=> J83-8
J8483-4 <=> J83-7
J8483-5 <=> J83-6
Is each continuous?
Error Messages and Codes
Yes No
Go to step 3. Replace feeder
harness 5.
Go to "Optional Replace feeder
550-Sheet harness 2.
Feeder PWBA
(Tray 4)" on
page 4-40.
3-55