Low Voltage Power Supply (Lvps) (P4500) - Xerox Phaser 4500 Service Manual

FRU Disassembly

Low Voltage Power Supply (LVPS) (P4500)

8-62
(PL12.1.5)
1. Exit motor PWBA
2. LVPS
Procedure:
1. Remove the front cover (page 8-11).
2. Remove the LVPS shield plate (page 8-60).
Caution
Do not attempt to unplug the cables from J101 or J104 on the LVPS.
These are soldered connections and attempts to disconnect the wires
will damage the circuit board.
1
3
4
P/J 42 41 40
P/J 43
44
45
46
47
48
3. P101
4. P/J404
Phaser 4500/4510 Service Manual
2
s4500-144