Paper Exit Rear Door - Xerox Phaser 4500 Service Manual

Paper Exit Rear Door

Phaser 4500/4510 Service Manual
(PL10.2.21)
1
1. Paper exit rear door
Procedure:
1. Open the duplex unit if one is installed (page 8-95).
2. Lift the lever to release the lock, and open the paper exit rear door.
3. Pry out the hinge retainer on the right side.
4. Release the hook of the left side hinge, and shift the paper exit rear door
in the direction of the arrow to remove from the printer.
Replacement Note:
When replacing the hinge retainer, bow it up in the center to allow the retainer
to snap into place.
2
2. Hinge Retainer
FRU Disassembly
s4500-135
8-5