Accessing Fault Histories - Xerox Phaser 4500 Service Manual

Accessing Fault Histories

Phaser 4500/4510 Service Manual
Unless otherwise specified, the following voltage tolerances are used
within this section:
Stated
+3.3 VDC
+5.0 VDC
+24.0 VDC
0.0 VDC
7. When a troubleshooting procedure instructs you to replace a non-spared
component and that component is part of a parent assembly, you should
replace the entire parent assembly.
Print (if possible) the Service Usage Profile.
a. At the printer's control panel, go to the
select Service Tools.
b. From the Service Tools
fault histories are detailed in this report log.
Or...
View the printer's fault history on the control panel.
Go to Troubleshooting Menu --> Service Tools --> Engine Error
History or Jam
Refer to the Error Message Summary tables that begin on page 3-21 to
interpret the numeric codes that appear in the printed or displayed fault
histories.
Measured
+3.135 to +3.465 VDC
+4.75 to +5.25 VDC
+21.6 to +26.4 VDC
Less than +0.5 VDC
Troubleshooting Menu
menu select Service Usage Profile.
History.
Error Messages and Codes
and
The
3-5