Paper Exit - Xerox Phaser 4500 Service Manual

Wiring Diagrams

Paper Exit

Engine
10-30
Signal line name
MO/DET-OUT
/LDENB
XP DATA+
XP DATA-
/ROSMOT ON
/ROSMOT CLK
HVPS/
P/J29
Pull Up 3.3V
Logic
1
PWBA
LG
2
/ FULLSTACK SNR ON
3
Signal line name
/FULLSTACK SNR ON
/FACE UP OPEN SNR
ON
Description
Laser output monitor signal for providing feedback of laser
output beam from Laser Diode (analog signal).
Control signal permitting emission of Laser Diode.
High: Laser Diode OFF.
Print image data. DATA+ > DATA-: lit up
DATA+ < DATA-: put out
Sensor Motor Control signal for turning Scanner Motor ON/OFF.
Low: ON / High: OFF
Clock signal to Laser Unit Motor.
Exit Sensor
Harness
Signal from output tray full sensor. This signal goes Low
when the flag moves out of the sensor.
Signal from Face-Up Open Sensor. This signal goes Low
when the flag moves out of the sensor.
Output Tray Full
Sensor
P/J290
3
2
1
Description
Phaser 4500/4510 Service Manual
s4510-240