Transfer Chute - Xerox Phaser 4500 Service Manual

FRU Disassembly

Transfer Chute

8-46
(PL8.1.22)
1
1. Transfer chute
Procedure:
1. Remove the transfer roller assembly (page 8-45).
2. Remove the fuser assembly (page 8-44).
3. P4500: Remove the main fan (page 8-68)
P4510: Remove the rear cover (page 8-6).
4. Lift the latch tab on the transfer chute and shift the transfer chute toward
the printer's left side.
5. Shift the transfer chute in the direction of the arrow, and remove it from the
frame.
2
2. Latch tab
Phaser 4500/4510 Service Manual
s4500-122