Xerox Phaser 4500 Service Manual page 407

Phaser 4500/4510 Service Manual
3. Release the hook of the offset bearing, and turn it 90 degrees CCW to
align the lock tabs with the keyway slots in the chassis. Remove the offset
bearing from the stacker housing.
4. Remove the offset chute assembly by raising the free end high enough to
clear the chassis while sliding in the direction of the arrow.
5. Release the hook of the roller bearing at the end of the roller with the
flatted shaft, rotate the bearing 90 degrees CW, and remove the bearing.
6. Remove the upper stacker roller from the offset chute assembly.
1. Upper stacker roller
2. Roller bearing
Replacement Note:
When installing gears 19 and 19/37, make sure the gears are correctly
oriented on their shafts.
1
2
FRU Disassembly
3. Offset chute assembly
3
s4500-216
8-127