Feed Clutch
Phaser 4500/4510 Service Manual
(PL7.1.20)
1. Out chute
2. Tie plate
Procedure:
1.
Remove the 150-sheet feeder assembly (page 8-15).
2.
Remove the 550-sheet feeder assembly (page 8-24).
3.
Remove the six 8 mm tapping screws that attach the tie plate to the out
chute, and remove the tie plate from the out chute.
4.
Unplug the connector (P/J247) of the feed clutch from the tray 2 harness
assembly.
5.
Remove the E-ring that secures the feed clutch, and slide the assembly
off the feed shaft.
1
2
FRU Disassembly
3
3. Feed clutch
s4500-106
8-29