Xerox Phaser 4500 Service Manual page 321

Phaser 4500/4510 Service Manual
9. Unplug J46 (Fuser status and sensor connections) and J47 (Fuser AC
connection) from P46 and P47 on the LVPS
10. Remove the three 6 mm machine screws that attach the print cartridge
left guide to the frame.
Caution
The loops on the print cartridge guide cover are fragile and can easily
break if spread too far. Spread the loops only enough to release the
hooks.
11. Carefully spread the loops on the print cartridge guide cover to release
the three latches in the print cartridge left guide (see the figure on the next
page). The loops are accessible through the D-shaped holes in the print
cartridge left guide.
12. Remove the print cartridge left guide from the frame.
Continue with "Fuser Harness Assembly" on page 8-42.
FRU Disassembly
8-41