Nudger Roller, Feed Roller - Xerox Phaser 4500 Service Manual

Nudger Roller, Feed Roller

Phaser 4500/4510 Service Manual
3. Disconnect the three wiring harness connectors (P/J801, P/J820, and P/
J855) exposed behind the rear cover.
4. Release release the wiring harnesses from the four harness clamps.
5. Remove the six 8 mm tapping screws that attach the optional 550-sheet
paper feeder to the frame.
6. Remove the optional 550-sheet paper feeder from the frame.
(PL20.2.11) (PL20.2.12)
1. Feed roller
Procedure:
1. Release the hook that retains the nudger roller and pull the roller off the
nudger shaft.
2. Release the hook that retains the feed roller and pull the roller off the feed
shaft.
Replacement Note:
The same roller (same part number) is used for the feed roller and nudger
roller assemblies.
FRU Disassembly
1
2
2. Nudger roller
s4500-161
8-87