Print Engine: 550-Sheet Paper Feeder; 550-Sheet Feeder Assembly - Xerox Phaser 4500 Service Manual

Hide thumbs Also See for Phaser 4500:

Table of Contents

FRU Disassembly

Print Engine: 550-Sheet Paper Feeder

1. Out chute

Remove the 150- and 550-sheet paper cassettes (trays 1 and 2).

Unplug the connector (P/J248) and release the cables from the two cable

restraints on the tie plate.

Remove the four screws (w/ lock washer and washer, 8 mm) that attach

the tie plate to the frame.

Remove the six screws from the tie plate and remove the tie plate from

the printer.

Remove the two screws (w/ lock washer and washer, 8 mm) that attach

the out chute to the frame.

Lower the right-hand side of the 550-sheet feeder assembly and rotate

the assembly clockwise into the printer cavity to free the left-hand side.

Then remove the 550-sheet feeder assembly from the frame.

2. Tie plate

Phaser 4500/4510 Service Manual