Duplex Unit Switch - Xerox Phaser 4500 Service Manual

FRU Disassembly

Duplex Unit Switch

8-110
6. Remove the motor bracket together with the duplex unit motor and duplex
unit switch.
Note
When removing the motor bracket, be careful not to lose the gears
attached to the duplex unit housing cover.
7. Remove the two 6 mm screws that attach the duplex unit motor to the
motor bracket.
8. Remove the duplex unit motor.
(PL21.1.27)
2
1. Duplex unit cover harness
2. Duplex unit switch
3. Duplex unit ground wire
Procedure:
1. Remove the duplex unit motor bracket as described in the duplex unit
motor procedure (page 8-109).
2. Disconnect the connector of the duplex unit cover assembly harness from
the connector (P/J52) of the duplex unit switch.
3. Release the hooks of the duplex unit switch, and remove it from the motor
bracket.
1
3
6
5
4
4. Motor bracket
5. Latch spring
6. Duplex unit housing cover
Phaser 4500/4510 Service Manual
s4510-196