Stacker Error - Xerox Phaser 4500 Service Manual

Stacker Error

Phaser 4500/4510 Service Manual
Diagnostic Error Code
E9-2: Stacker Unit failure
Troubleshooting Reference
Applicable Parts
Stacker assembly harness 1
HVPS/engine logic board
Stacker PWBA
Stacker assembly harness 2
Troubleshooting Procedure
Steps Actions and Questions
Remove the stacker, re-install it, and
1
turn the power ON.
Does the error still occur?
Error Messages and Codes
Wiring and Plug/Jack Map References
"Stacker General Wiring Diagram" on
page 10-36
"Stacker Signal Diagram" on page 10-37
"Stacker Plug/Jack Locator" on page 10-16
Yes
Go to "Stacker
PWBA" on
page 4-54.
No
Problem solved.
3-53