Residual Image - Xerox Phaser 4500 Service Manual

Residual Image

Phaser 4500/4510 Service Manual
The image from a previous print, which was not removed during the cleaning
process, has been developed on the current print.
Initial Actions
Inspect the printer paper path for
foreign items, such as staples, paper
clips, and paper scraps.
Check the installation of the print
cartridge.
Check that the print cartridge ground
contact points are clean.
Verify the paper is within the
specifications on the Paper Tips Page.
Residual Image Troubleshooting Procedure
Step Actions and Questions
1. Replace paper with fresh, dry
1
paper.
2. Print a test print.
Do the residual images still
appear?
1. Install a new print cartridge.
2
2. Print a test print.
Do the residual images still
appear?
Inspect the transfer roller
3
assembly for contamination and
wear.
Is the transfer roller free of
contamination and wear?
Print-Quality Troubleshooting
Yes No
Go to step 2. Problem solved.
Go to step 3. Problem solved.
Go to step 4. Replace the transfer
roller assembly
(page 8-45).
s4510-046
5-39