FRU Disassembly
Overview
Standard Orientation of the Printer
8-2
This section contains the removal and replacement procedures for selected
parts of the printer according to the Field Replaceable Units (FRUs) Parts
List. Replacement procedures are not provided for most of the FRUs because
in most cases, re-installing a part only requires reversing the removal
procedure. Where the replacement process is not a simple reversal of the
removal, a replacement procedure is included. Replacement Notes provide
tips and suggestions that can aid in reassembling the part.
Locations given in the repairs, such as left, right, front, or rear, assume you
are facing the printer control panel.
When needed the orientation of the printer is called out in the procedure for
locating printer parts, refer to the printer orientation graphic for locating the
right, left, front and back sides of the printer.
2
1
1. Front
2. Left
3
3. Right
4. Rear or Back
Phaser 4500/4510 Service Manual
4
s4500-247