Tray 2 Paper Is Low - Xerox Phaser 4500 Service Manual

Error Messages and Codes

Tray 2 Paper Is Low

3-64
Error Indication
Tray 2 Paper is Low
Troubleshooting Reference
Applicable Parts
Low paper sensor
Low paper actuator
Bottom plate assembly
HVPS/engine logic board
550-sheet paper cassette
550-sheet feeder assembly
Troubleshooting Procedure
Steps Actions and Questions
1 Insert a paper cassette filled with
paper into tray 2.
Does the error still occur?
2 1. Remove the paper cassette from
tray 2.
2. Manually operate the low paper
actuator.
Does the low paper actuator move
smoothly?
Does the low paper actuator go into
the sensor part of low paper sensor
when the flag is pushed up?
Does the low paper actuator go out of
the sensor part of low paper sensor
when the flag is released?
Manually push and release the bottom
3
plate assembly.
Does the bottom plate assembly
move the low paper actuator
normally?
4 Enter Service Diagnostics, and from
the
Tray 2 Low Paper
Is the correct state reported when the
low paper actuator is manually
actuated?
Wiring and Plug/Jack Map References
"150-Sheet Feeder, 550-Sheet Feeder, Main
Fan" on page 10-27
"Print Engine Wiring Diagrams" on page 10-19
"Print Engine Plug/Jack Locator" on page 10-3
menu select the
Sensor Tests
test.
Yes No
Go to step 2. Problem solved.
Go to step 3. Replace the low
paper actuator.
Go to step 4. Replace the
paper cassette.
Replace the Go to "Low
HVPS/engine Paper Sensor"
logic board on page 4-21.
(page 8-73).
Phaser 4500/4510 Service Manual