Unfused Image - Xerox Phaser 4500 Service Manual

Unfused Image

Phaser 4500/4510 Service Manual
The printed image is not fully fused to the paper. The image rubs off easily.
Initial Actions
Check to ensure that the paper is within
specifications.
Unfused Image Troubleshooting Procedure
Step Actions and Questions
1. Replace the paper with fresh,
1
dry paper from an unopened
ream.
2. Print a test print.
Is the problem still present?
1. Check that the levers on both
2
sides of the fuser assembly are
pushed down.
2. Reprint the problem image.
Does the problem still occur?
Print-Quality Troubleshooting
Yes No
Go to step 2. Problem solved.
Go to step 3. Problem solved.
s4500-265
s4510-051
5-31