Main Fan (P4510)
Phaser 4500/4510 Service Manual
(PL1.1.14)
2
1. Cable clamp
Procedure:
1.
Remove the paper exit rear door (page 8-5).
2.
Remove the rear cover (page 8-6).
3.
Release the fan cable from the cable clamp on the rear cover.
4.
Remove the two screws (tapping, 8 mm) that attach the main fan to the
rear cover.
5.
Slide the fan down and out of the fan well on the rear cover.
Replacement Note:
When installing, make sure the label faces the rear cover.
FRU Disassembly
1
2. Label
s4510-147
8-69