Close Stacker Cover - Xerox Phaser 4500 Service Manual

Error Messages and Codes

Close Stacker Cover

3-60
Troubleshooting Reference
Applicable Parts
HVPS/engine logic board
LVPS
Stacker PWBA
Rear cover
Stacker cover
Rear cover switch
Rear cover assembly harness
Troubleshooting Procedure
Steps Actions and Questions
Check the stacker rear cover.
1
Is the tab on stacker rear cover that
actuates the cover switch damaged?
Check the stacker rear cover switch:
2
Enter Service Diagnostics, and from
the Sensor Tests
Stacker Cover Switch
Is the position correctly reported
when the stacker cover is opened and
closed?
Wiring and Plug/Jack Map References
"Stacker Signal Diagram" on page 10-37
"Stacker General Wiring Diagram" on
page 10-36
"Stacker Plug/Jack Locator" on page 10-16
Yes
Replace the
stacker rear
cover
(page 8-112)
Replace the
HVPS/engine
menu select the logic board
test. (page 8-73).
Phaser 4500/4510 Service Manual
No
Go to step 2.
Go to "Stacker
Rear Cover
Switch" on
page 4-58.