Gear Assembly Plate - Xerox Phaser 4500 Service Manual

FRU Disassembly

Gear Assembly Plate

8-58
(PL11.1.10)
3
1. Gear 9
2. Gear assembly plate
3. Locking tab
Procedure:
1. Remove the fuser assembly (page 8-44).
2. Remove the gear assembly housing (page 8-56).
Note
When removing the gear assembly plate, one of the gears installed
on the gear assembly plate is not secured on its shaft and might
come off. Also, there is a spring inside of the gear that is not secured
to the gear assembly plate. Take care to avoid dropping these parts.
1
4
5
4. Gear
5. Spring
Phaser 4500/4510 Service Manual
2
s4500-141