Oil Pump Removal And Installation - Suzuki GSX-R750 Service Manual

1E-12 Engine Lubrication System:
Oil Gallery Jet
Inspect the oil gallery jet for clogging. Clean the oil
gallery if necessary.

Oil Pump Removal and Installation

NOTE
Be careful not to drop any parts into the
crankcase.
Removal
1) Remove the oil pan, oil strainer and oil pressure
regulator. Refer to "Oil Pan / Oil Strainer / Oil
Pressure Regulator Removal and Installation
(Page 1E-6)".
2) Remove the oil pump driven gear bolt (1).
3) Remove the chain (2) with the oil pump driven gear
(3).
4) Remove the washer (4).
2
1
3
5) Remove the oil pump (5).
Installation
I837H1150030-01
B838H21506011
4
I837H1150031-01
5
I837H1150032-01
6) Remove the O-ring (6) and dowel pins.
6
1) Apply grease to the O-ring and install the dowel pins.
CAUTION
!
Use a new O-ring to prevent oil leakage.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
2) Install the oil pump.
NOTE
Set the oil pump shaft end "A" to the water
pump shaft "B".
"B"
I837H1150033-01
I837H1150034-01
"A"
I837H1150035-01