Suzuki GSX-R750 Service Manual page 652

9D-14 Exterior Parts:
Installation
Install the body cowling in the reverse order of removal.
Pay attention to the following points:
• Fit the lead wire clamp to the screw "A".
"A"
• Tighten the mounting nuts to the specified torque.
Tightening torque
Rear view mirror mounting nut (a): 10 N·m (1.0
kgf-m, 7.0 lb-ft)
(a)
• Adjust the headlight beam if necessary. Refer to
"Headlight Beam Adjustment in Section 9B (Page 9B-
4)".
Intake Pipe
Removal
1) Remove the body cowling.
2) Remove the fasteners (1) and screws (2).
3) Remove the intake pipes (3). (LH & RH)
2
1
Installation
Install the intake pipes in the reverse order of removal.
I837H1940025-01
(a)
I837H1940014-02
1
3
I837H1940019-01
Cowling Brace
Removal
1) Remove the body cowling.
2) Remove the cowling brace (1).
Installation
Install the cowling brace in the reverse order of removal.
Pay attention to the following point:
• Tighten the cowling brace mounting bolts (1) to the
specified torque.
Tightening torque
Cowling brace mounting bolt (a): 23 N·m (2.3 kgf-
m, 16.5 lb-ft)
1
(a)
Frame Cover
Removal
1) Remove the front and rear seats.
2) Disconnect the rear combination light coupler (1)
and seat lock cable (2).
3) Remove the screws (3).
2
1
I837H1940020-01
I837H1940021-01
3
1
I838H1940003-01