Suzuki GSX-R750 Service Manual page 275

12
• Remove the clamps.
Cam Chain Tension Adjuster
• Holding the cam chain tension adjuster as shown in
the figure, compress the plunger by turning the
adjuster body until the outer circlip "A" reaches the
groove "B".
• Hook the outer circlip "A" into the groove "B", then turn
the plunger head clockwise more than 90° to make a
little play in the inner thread mechanism.
"B"
"A"
16
(4) 18
26
25 (3) 17
15
11
I837H1140229-01
I823H1140355-01
14 8
20
(2) 22
(1) 21
19
7
13
• Fit a new gasket (1).
CAUTION
!
Use a new gasket to prevent oil leakage.
• Install the cam chain tension adjuster (2).
Tightening torque
Cam chain tension adjuster mounting bolt (a): 10
N·m (1.0 kgf-m, 7.0 lb-ft)
• Remove the cam chain tension adjuster service cap
(3) and gasket (4).
• Unhook the outer circlip "A" from its groove by
pushing the stepped part (5) of the plunger head with
a (–) screwdriver.
Engine Mechanical:
10
(6) 24
(5) 23
9
1
3
2
4
(a)
1D-31
I837H1140228-01
I837H1140230-01
I837H1140231-02