Suzuki GSX-R750 Service Manual page 408

1I-11 Starting System:
8) Remove the starter driven gear (12).
9) Hold the generator rotor with the special tool and
remove the starter clutch bolts.
Special tool
(A): 09930–44530 (Rotor holder)
(A)
10) Remove the one way clutch (13) from the starter
clutch guide (14).
12
I837H1190023-01
I837H1190024-02
13
14
I837H1190025-02
Installation
Install the starter clutch in the reverse order of removal.
Pay attention to the following points:
• When inserting the one way clutch (1) into the starter
clutch guide (2), fit the flange "A" in the step of the
starter clutch guide (2).
NOTE
Be sure to seat the flange "A" of the one way
clutch (1) to the starter clutch guide (2).
"A"
• When installing the starter clutch guide (2) to the
generator rotor (3), make sure that the flange "B" side
faces outside.
"B"
• Degrease the bolt holes.
1
2
I837H1190026-01
I718H1190031-01
2
3
I837H1190027-03