Suzuki GSX-R750 Service Manual page 146

1A-74 Engine General Information and Diagnosis:
Step
1 6) Disconnect the ECM coupler. Refer to "ECM Removal
and Installation in Section 1C (Page 1C-1)".
7) Insert the needle pointed probes to the lead wire coupler.
8) Check the continuity between the B wire and terminal
"31". Also, check the continuity between B/Br wire and
terminal "35".
Special tool
(A): 09900–25008 (Multi-circuit tester set)
(B): 09900–25009 (Needle pointed probe set)
Tester knob indication
Continuity test (
ECM coupler (Harness side)
(B)
Is the continuity OK?
Action
)
(A)
"31"
"35"
(Black)
(Gray)
Go to Step 2.
?
I837H1110051-01
Yes
B wire shorted to VCC,
or B/Br wire open.
No