Gearshift Lever Construction; Gearshift Lever Removal And Installation; Gearshift Lever Height Inspection And Adjustment - Suzuki GSX-R750 Service Manual

5B-14 Manual Transmission:

Gearshift Lever Construction

"A": Footrest top surface
"a": Approx. 4° 50'

Gearshift Lever Removal and Installation

Removal
Remove the gearshift lever as shown in the gearshift
lever construction. Refer to "Gearshift Lever
Construction (Page 5B-14)".
Installation
1) Install the gearshift lever as shown in the gearshift
lever construction. Refer to "Gearshift Lever
Construction (Page 5B-14)".
2) After installing the gearshift lever, check the gearshift
lever height. Refer to "Gearshift Lever Height
Inspection and Adjustment (Page 5B-14)".
Gearshift Lever Height Inspection and
Adjustment
Inspect and adjust the gearshift lever height in the
following procedures:
1) Inspect the gearshift lever height "a" between the
lever top and footrest.
Adjust the gearshift lever height if necessary.
Gearshift lever height "a"
Standard: 65 – 75 mm (2.6 – 3.0 in)
(a)
"b": 30 mm (1.2 in)
"c": 65 – 75 mm (2.6 – 3.0 in)
B838H25206010
B838H25206011
"a"
"b"
"A"
"c "
(b)
I837H1520073-02
: 40 N⋅m (4.0 kgf-m, 29.0 lb-ft)
: 28 N⋅m (2.8 kgf-m, 20.0 lb-ft)
"a"
2) Loosen the lock-nuts (1).
3) Turn the gearshift link rod (2) until the gearshift lever
is 65 – 75 mm (2.6 – 3.0 in) below the top of the
footrest.
4) Tighten the lock-nuts securely.
1
B838H25206009
: Apply grease.
I837H1520046-01
2
I837H1520047-01