4) Remove the following fasteners.
5) Remove the frame cover assembly from the frame.
Tightening Torque Specifications
Fastening part
Rear view mirror mounting nut
Cowling brace mounting bolt
NOTE
The specified tightening torque is also described in the following.
"Exterior Parts Construction (Page 9D-1)"
"Rear View Mirror Construction (Page 9D-8)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque List in Section 0C
(Page 0C-9)".
Installation
Install the frame cover assembly in the reverse order of
removal.
Front Fender
Removal
Refer to "Front Fork Removal and Installation in Section
2B (Page 2B-2)".
Installation
Refer to "Front Fork Removal and Installation in Section
2B (Page 2B-2)".
I837H1940023-04
Rear Fender
Removal
Refer to "Rear Fender Construction (Page 9D-4)".
Installation
Refer to "Rear Fender Construction (Page 9D-4)".
I838H1940004-01
Specifications
Tightening torque
N⋅m
kgf-m
10
1.0
23
2.3
Exterior Parts:
B838H29407001
Note
lb-ft
7.0
(Page 9D-14)
16.5
(Page 9D-14)
9D-15