Steering / Steering Damper Related Parts Inspection - Suzuki GSX-R750 Service Manual

6B-9 Steering / Handlebar:
Steering stem upper bracket
Install the front forks and steering stem upper bracket in
the following steps:
1) Temporarily install the upper bracket, washer (1) and
steering stem head nut (2). Refer to "Handlebar
Removal and Installation (Page 6B-2)".
2) Temporarily install the front forks.
3) Tighten the steering stem head nut (2) to the
specified torque.
Tightening torque
Steering stem head nut (a): 90 N·m (9.0 kgf-m,
65.0 lb-ft)
2
(a)
4) Tighten the front fork upper and lower clamp bolts.
Refer to "Front Fork Removal and Installation in
Section 2B (Page 2B-2)".
Steering damper
• Apply grease to the bearings and dust seals.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
2
1
I837H1620025-01
I837H1620026-01
I823H1620019-02
• Install the steering damper and tighten the bolt (1) and
nut (2).
Tightening torque
Steering damper bolt (a): 23 N·m (2.3 kgf-m, 16.5
lb-ft)
Steering damper nut (b): 23 N·m (2.3 kgf-m, 16.5
lb-ft)
1
(a)
Inspection after installation
• Check the steering tension. Refer to "Steering Tension
Adjustment (Page 6B-11)".
Steering / Steering Damper Related Parts
Inspection
Refer to "Steering / Steering Damper Removal and
Installation (Page 6B-6)".
Inspect the removed parts for the following
abnormalities:
Steering Stem
• Distortion of the steering stem
2
(b)
I837H1620027-01
B838H26206007
I837H1620028-01