Rear Wheel Dust Seal / Bearing Removal And Installation - Suzuki GSX-R750 Service Manual

Rear Wheel Dust Seal / Bearing Removal and
Installation
Removal
1) Remove the rear wheel assembly. Refer to "Rear
Wheel Assembly Removal and Installation
(Page 2D-11)".
2) Remove the rear sprocket mounting drum assembly
(1) from the rear wheel.
3) Remove the dust seal (2).
Special tool
(A): 09913–50121 (Oil seal remover)
4) Remove the wheel dampers (3).
3
B838H22406010
1
I838H1240003-01
(A)
2
I837H1240024-02
I837H1240025-02
5) Remove the bearings (4) on both sides using the
special tool.
Special tool
(B): 09921–20240 (Bearing remover set)
(B)
6) Remove the spacer (5).
5
Installation
CAUTION
!
The removed dust seal and bearings must be
replaced with new ones.
1) Apply grease to the wheel bearings.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
Wheels and Tires:
(B)
4
4
I837H1240026-02
I837H1240027-02
I649G1240019-02
2D-13