Transmission Installation - Suzuki GSX-R750 Service Manual

4) Remove the driveshaft left bearing (4) with the
special tool.
Special tool
(D): 09913–70210 (Bearing installer set)
5) Remove the driveshaft left bearing oil seal (5) from
the retainer using the special tool.
Special tool
(D): 09913–70210 (Bearing installer set)

Transmission Installation

Install the transmission in the reverse order of removal.
Pay attention to the following points:
Bearing and Oil Seal
(D)
4
• Install the driveshaft left bearing dust oil seal (1) with
I837H1520012-01
(D)
• Install the driveshaft left bearing (2) with the special
5
I837H1520013-01
Manual Transmission:
CAUTION
!
Replace the removed bearings and oil seals
with new ones.
the special tool.
Special tool
(A): 09913–70210 (Bearing installer set)
(A)
tool.
NOTE
The stamped mark side of the driveshaft left
bearing faces outside.
Special tool
(A): 09913–70210 (Bearing installer set)
5B-5
B838H25206003
1
I837H1520014-01
(A)
2
I837H1520015-01