Suzuki GSX-R750 Service Manual page 440

1K-13 Exhaust System:
Installation
Installation is in the reverse order of removal. Pay
attention to the following points:
• Tighten the HO2 sensor to the specified torque.
Tightening torque
HO2 sensor (a): 25 N·m (2.5 kgf-m, 18.0 lb-ft)
CAUTION
!
• Be careful not to expose the HO2 sensor to
an excessive shock.
• Do not use an impact wrench when
installing the HO2 sensor.
• Be careful not to twist or damage the HO2
sensor lead wires.
• Do not apply oil or other materials to the
sensor air holes.
• Install the exhaust pipe gaskets (1).
CAUTION
!
Replace the gaskets with new ones.
(a)
I837H11B0011-01
1
I837H11B0012-01
• Tighten the exhaust pipe bolts and exhaust pipe
mounting bolts to the specified torque.
Tightening torque
Exhaust pipe bolt (b): 23 N·m (2.3 kgf-m, 16.5 lb-
ft)
Exhaust pipe mounting bolt (c): 23 N·m (2.3 kgf-
m, 16.5 lb-ft)
(b)
• Tighten the EXCV cables mounting nuts to the
specified torque.
Tightening torque
EXCV cable mounting nut (d): 5.5 N·m (0.55 kgf-
m, 4.0 lb-ft)
(b)
I837H11B0013-02
(c)
I837H11B0014-01
(d)
I837H11B0015-01