Suzuki GSX-R750 Service Manual page 599

Bearing
• Apply grease to the bearings, bearing races and dust
seals before remounting the steering stem.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
Steering stem nut
• Tighten the steering stem nut (1) to the specified
torque with the special tools.
Special tool
(A): 09940–14911 (Steering stem nut wrench)
(B): 09940–14960 (Steering nut wrench
socket)
Tightening torque
Steering stem nut (a): 45 N⋅m (4.5 kgf-m, 32.5 lb-
ft) then turn back 1/2 – 1/4
1
(a)
• Turn the steering stem lower bracket about five or six
• Loosen the steering stem nut 1/4 – 1/2 turn "a".
I837H1620020-01
• When installing the washer (2), align the lug of the
I837H1620021-01
• Tighten the steering stem lock-nut (3) to the specified
(A)
(B)
I837H1620022-01
Steering / Handlebar:
times to the left and right so that the angular ball
bearings seat properly.
NOTE
This adjustment will vary from motorcycle to
motorcycle.
washer to the groove of the steering stem.
torque with the special tools.
Special tool
(A): 09940–14911 (Steering stem nut wrench)
(B): 09940–14960 (Steering nut wrench
socket)
Tightening torque
Steering stem lock-nut (b): 90 N·m (9.0 kgf-m,
65.0 lb-ft)
3
(b)
6B-8
" a "
I649G1620026-02
2
I837H1620023-01
(A)
(B)
I837H1620024-01