Suzuki GSX-R750 Service Manual page 479

3) Tighten the brake caliper mounting bolts (2) to the
specified torque.
Tightening torque
Front brake caliper mounting bolt (a): 39 N·m (
3.9 kgf-m, 28.0 lb-ft)
WARNING
!
After remounting the brake calipers, pump
the brake lever until the pistons push the
pads correctly.
2
(a)
4) Hold the front axle with the special tool and tighten
the front axle bolt (3) to the specified torque.
Special tool
(A): 09900–18740 (Hexagon socket (24
mm))
Tightening torque
Front axle bolt (b): 100 N·m (10.0 kgf-m, 72.5 lb-
ft)
5) Tighten two axle pinch bolts (4) on the right fork leg
to the specified torque.
Tightening torque
Front axle pinch bolt (c): 23 N·m (2.3 kgf-m, 16.5
lb-ft)
(A)
2
(a)
I837H1240006-01
3
(b)
4
(c)
I837H1240007-01
6) Move the front fork up and down 4 or 5 times.
7) Tighten two axle pinch bolts (5) on the left front fork
leg to the specified torque.
Tightening torque
Front axle pinch bolt (d): 23 N·m (2.3 kgf-m, 16.5
lb-ft)
5
8) Install the under cowlings. Refer to "Exterior Parts
Removal and Installation in Section 9D (Page 9D-
11)".
Wheels and Tires: 2D-5
I838H1240001-01
(d)
I837H1240009-02