Side-Stand Removal And Installation; Specifications; Tightening Torque Specifications; Special Tools And Equipment - Suzuki GSX-R750 Service Manual

Side-stand Removal and Installation

Removal
1) Support the motorcycle with a jack or wooden block.
CAUTION
!
• Do not support the motorcycle with the exhaust pipes.
• Make sure that the motorcycle is supported securely.
2) Remove the side-stand as shown in the side-stand construction. Refer to "Side-stand Construction (Page 9E-3)".
Installation
Install the side-stand as shown in the side-stand construction. Refer to "Side-stand Construction (Page 9E-3)".

Tightening Torque Specifications

NOTE
The specified tightening torque is also described in the following.
"Body Frame Construction (Page 9E-1)"
"Front Footrest Bracket Construction (Page 9E-2)"
"Side-stand Construction (Page 9E-3)"
Reference:
For the tightening torque of fastener not specified in this section, refer to "Tightening Torque List in Section 0C
(Page 0C-9)".

Recommended Service Material

NOTE
Required service material is also described in the following.
"Front Footrest Bracket Construction (Page 9E-2)"
"Side-stand Construction (Page 9E-3)"
"Pillion Footrest Construction (Page 9E-3)"

Specifications

Special Tools and Equipment

Body Structure: 9E-4
B838H29506005
B838H29507001
B838H29508001