Suzuki GSX-R750 Service Manual page 562

5B-12 Manual Transmission:
Gearshift Fork Groove Width
Measure the gearshift fork groove width using the
vernier calipers.
Special tool
(A): 09900–20102 (Vernier calipers (1/20 mm,
200 mm))
Gearshift fork groove width
Standard: 5.0 – 5.1 mm (0.197 – 0.201 in)
Gearshift Fork Thickness
Measure the gearshift fork thickness using the vernier
calipers.
Special tool
(A): 09900–20102 (Vernier calipers (1/20 mm,
200 mm))
Gearshift fork thickness
Standard: 4.8 – 4.9 mm (0.189 – 0.193 in)
Gearshift Cam Bearing
Inspect the gearshift cam bearings, left and right for
abnormal noise and smooth rotation.
Replace the bearing if there is anything unusual. Refer
to "Transmission Removal (Page 5B-3)" and
"Transmission Installation (Page 5B-5)".
Driveshaft Bearing
• Inspect the driveshaft left bearing for abnormal noise
(A)
• Inspect the driveshaft right bearing for abnormal noise
I649G1520057-03
(A)
Driveshaft Oil Seal
• Inspect the driveshaft left bearing dust seal for wear
I649G1520058-03
I837H1520039-02
and smooth rotation while it is in the case.
Replace the bearing if there is anything unusual.
Refer to "Transmission Removal (Page 5B-3)" and
"Transmission Installation (Page 5B-5)".
and smooth rotation.
If there is anything unusual, replace the bearing
assembly. Refer to "Transmission Removal (Page 5B-
3)" and "Transmission Installation (Page 5B-5)".
and damage.
Replace the dust seal if there is anything unusual.
Refer to "Transmission Removal (Page 5B-3)" and
"Transmission Installation (Page 5B-5)".
I837H1520040-01
I837H1520041-01
I837H1520042-01