Front Wheel Dust Seal / Bearing Removal And Installation - Suzuki GSX-R750 Service Manual

Front Wheel Dust Seal / Bearing Removal and
Installation
Removal
1) Remove the front wheel assembly. Refer to "Front
Wheel Assembly Removal and Installation
(Page 2D-4)".
2) Remove the dust seals (1) using the special tool.
Special tool
(A): 09913–50121 (Oil seal remover)
1
3) Remove the bearings (2) using the special tool.
Special tool
(B): 09921–20240 (Bearing remover set)
(B)
B838H22406005
(A)
I837H1240011-01
2
I837H1240012-01
4) Remove the spacer (3).
Installation
CAUTION
!
The removed dust seals and bearings must
be replaced with new ones.
1) Apply grease to the wheel bearings.
: Grease 99000–25010 (SUZUKI SUPER
GREASE A or equivalent)
Wheels and Tires: 2D-7
3
I837H1240013-01
I649G1240019-02