Radiator Removal - Husqvarna CR 50 / 2011 Workshop Manual

3
2
2
3
4
5
Ed. 01-02-2010
GENERAL PROCEDURES

Radiator removal

- Remove the fuel tank together with scoops and spoilers as outlined in the
relevant paragraphs.
- Drain coolant as described in the relevant paragraph.
- Remove the plastic grids (1) from radiators by slightly bending them.
1
H02119
- Undo pipe clamps (2).
- Disconnect pipes (3) from radiators (4).
4
H06261
- Loosen screws (5), and remove the two radiators (4).
(8 mm ring wrench)
5
2
H06262
5
4
H02122
E.17