Rear Stop Connection; Routing Of Steering Head Tube Wiring; Dashboard Bracket Connectors (Te); Headlamp, Front Turning Indicators, Stop Connection (Te) - Husqvarna TE 250-310 2012 I.E. Workshop Manual

ELECTRICAL SYSTEM
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA
• Clip installation on fuse holders
Secure the three fuses to the suitable perforated panel of the rear mudguard.

• Rear stop connection

Connect the wiring connector (A) to the rear STOP sensor.
A
H10151

• Routing of steering head tube wiring

Secure the wiring harness with the suitable clip (34).
34
H02327

• Dashboard bracket connectors (TE)

Secure the dashboard (35) and diagnostic (36) connector using the suitable
clips. Fit the cap (37) to the diagnostic connector (36).

• Headlamp, front turning indicators, STOP connection (TE)

Connect the headlamp unit to the connector (38).
Connect the connectors (39) to the turning indicators.
Connect the connector (40) to the front brake lever.
Workshop Manual Ed. 12-2011
M.52