Installing The Air Filter; Preparing Air Filter Box Cover For Securing; Removing The Main Silencer - Husqvarna 250 XC TPI 2021 Owner's Manual

11.26

Installing the air filter

11.27

Preparing air filter box cover for securing

11.28

Removing the main silencer

Warning
Danger of burns The exhaust system gets very hot when the vehicle is driven.
–
Allow the exhaust system to cool down before performing any work on the vehicle.
Main work
–
Mount the clean air filter on the air filter support.
–
Grease the air filter in area
Long-life grease (
102178-10
–
Insert the air filter and position the top retaining pin
B
bushing .
The air filter is correctly positioned.
–
Secure the bottom retaining pin with holding tab
Info
If the air filter is not mounted correctly, dust and dirt
may enter the engine and result in damage.
K01186-10
Finishing work
–
Install the air filter box cover. (
Preparatory work
–
Remove the air filter box cover. (
Main work
–
Drill a hole at marking
Guideline
Diameter
S02308-10
Finishing work
–
Install the air filter box cover. (
SERVICE WORK ON THE CHASSIS 11
A
.
p. 140)
p. 61)
p. 60)
A
.
6 mm (0.24 in)
p. 61)
1
in
2
.
63