Number Plate Holder Removal (Te My12) - Husqvarna TC 449 2011 I.E. Workshop Manual

Workshop Manual Ed. 03-2012
GENERAL PROCEDURES
TC 449 2011/2012 I.E.
TE 449 - 511 2011/2012 I.E.
TXC 449 - 511 2011/2012 I.E.
SMR 449 2011 I.E.
SMR 511 2011/2012 I.E.

Number plate holder removal (TE MY12)

- Remove the tail section and the rear turning indicators as described in the
relevant paragraphs.
- Loosen the two screws (1).
- Disconnect the number plate light cable (2).
- Slide the number plate holder (3) down and remove it.
When reassembling, check that the longest bushings (4) are placed
on the mudguard and the shortest ones (5) are placed on the number
H11174
plate holder.
H11175
H11176
H11177
E.6