Gear Shift Control Assembly - Husqvarna TC 250 2010 Workshop Manual

ENGINE REASSEMBLY

Gear shift control assembly

Refit the spring abutment pin (1) using a 12 mm wrench (apply Loctite 243 and
tighten to 20 Nm, 2.0 Kgm, 14.5 ft/lb).
Install ratchet (2), spring (3), washer (4) and circlip (5).
Install the selector drum (6) making sure the tab (7) locates in the recess (8) and
secure drum with its screw (9). (Apply Loctite 243, tighten to 20 Nm, 2.0 Kgm,
14.5 ft/lb, use 12 mm wrench).
Engage the spring (3).
Part. N. 8000 H1489 (10-2009) H.29