Gear Shift Control Assembly - Husqvarna TE 250-310 2012 I.E. Workshop Manual

ENGINE REASSEMBLY
TE 250 - 310 2012 I.E. / TE 250 - 310 2012 I.E. USA
TC 250 2012 - TC 250 2012 I.E. USA
TXC 250 - 310 2012 I.E. USA

Gear shift control assembly

Refit the spring abutment pin (1) using a 12 mm wrench (apply Loctite 243 and
tighten to 20 Nm, 2.0 Kgm, 14.5 ft/lb).
Install ratchet (2), spring (3), washer (4) and circlip (5).
Install the selector drum (6) making sure the tab (7) locates in the recess (8) and
secure drum with its screw (9). (Apply Loctite 243, tighten to 20 Nm, 2.0 Kgm,
14.5 ft/lb, use 12 mm wrench).
Engage the spring (3).
H11119
Workshop Manual Ed. 12-2011
H.28