8. 4. Disassembly and Replacement
[A] Laser fan motor
(1) Remove the top right cover, feed side upper
cover and feed side center cover. Remove 1
screw and loosen 10 screws and take off the
plate cover.
(2) Remove 2 screws and take off the optical unit
fixing stay.
(3) Disconnect 1 connector and remove 2 screws
to take off the laser fan motor.
e-STUDIO550/650/810 LASER OPTICAL UNIT
Laser fan motor
Connecotor
8 - 8
JUNE 2002 © TOSHIBA TEC