9. 5. Disassembly and Replacement
[A] Feed unit
(A-1) Pickup roller/Feed roller/Separation roller
(1) Remove the feed side rear cover.
(2) Open the feed side center cover and disconnect
1 connector.
(3) Remove 2 pins and lift the bypass feed unit with
the feed side center cover to take off.
(4) Open the feed side bottom cover and lift it to
take off.
(5) Pull out the cassette or tandem LCF completely.
Note: With failing that, sensors may be damaged.
(6) Disconnect 1 connector, remove 3 screws and
take off the feed unit.
JUNE 2002 © TOSHIBA TEC
Connector
9 - 11
e-STUDIO550/650/810 PAPER FEEDING SYSTEM