Toshiba e-studio550 Service Manual page 225

(2) Remove 2 screws and take off the stay.
(3) Disconnect each connector, remove each screw
and take off the thermistor and thermostat.
Notes: 1. When instaling the thermister and
thermostat, be careful not to deform them
and plate to which they are installed.
2. Adjust the gap between the thermostat (2
points) and fuser roller to the range
between 2~2.5mm.
[I] Fuser roller
(1) Loosen 2 pressure screws completely.
(2) Remove 2 screws and take off the fuser unit
cover (rear).
JUNE 2002 © TOSHIBA TEC
2.0~2.5mm
14 - 19
Fuser unit
cover (rear)
e-STUDIO550/650/810 FUSER UNIT