Toshiba e-studio550 Service Manual page 264

(11) Start of 2nd original back side registering
Same operation as 16.5.2.(6)
(12) Start of 2nd original back side feeding
Same operation as 16.5.2.(7)
(13) Start of 2nd original back side scanning
Same operation as 16.5.2.(8)
(14) Idle reversing and discharging of 2nd original
Both the large original exit and read motors start to rotate foward. When the leading edge of the original
has reached the read sensor then been transported a specified distance by the read motor, the
disengagement solenoid turns ON. The large original exit motor stops when the disengagement sole-
noid has turned ON.
When the leading edge of the original has been transported to the large original exit side and reached
the 3rd roller and, the large original exit motor starts to rotate in reverse.
The large original exit motor starts to slow down when the trailing edge of the original has passed the
4th roller and proceeded a specified distance. The read motor stops rotating without a next original.
The large original exit motor stops rotating when the trailing edge of the original has been detected by
the large original exit sensor and proceeded a specified distance. The large original exit solenoid turns
OFF and the operation ends when the original has been discharged.
JUNE 2002 © TOSHIBA TEC 16 - 27 e-STUDIO550/650/810 RADF