Toshiba e-studio550 Service Manual page 310

16. 13. Disassembly and Replacement
[A] RADF unit
(1) Remove the rear cover and disconnect 1
connector.
(2) Remove 2 screws, open and move the RADF
unit toward the rear side and take it off
upward.
[B] Covers
(B-1) ADF front cover
(1) Open the jam access cover, remove 3 screws
and take off the ADF front cover.
(B-2) ADF rear cover
(1) Open the jam access cover, remove 4 screws
and take off the ADF rear cover.
JUNE 2002 © TOSHIBA TEC
ADF rear cover
16 - 73
Connector
ADF front cover
e-STUDIO550/650/810 RADF