Toshiba e-studio550 Service Manual page 223

[E] Upper separation finger unit
(1) Remove 2 screws and take off the crank plate
and upper separation finger unit.
(2) Remove each spring and take off each
separation finger.
[F] Cleaning roller (metal)/Lower separation finger
(1) Remove 2 screws and open the guide.
(2) Remove the cleaning roller (metal).
(3) Remove each spring and take off each lower
separation finger.
JUNE 2002 © TOSHIBA TEC
Crank plate
Upper separation finger
Cleaning roller (metal)
Lower separation finger
14 - 17
Upper separation finger unit
Spring
Spring
e-STUDIO550/650/810 FUSER UNIT