Toshiba e-studio550 Service Manual page 252

The SCN-STR turns OFF when the trailing edge of the original has passed the scanning section. At the
same time, both the read and the large original exit motors start to accelerate and the disengagement
solenoid turns OFF.
When the trailing edge of the original has passed the 4th roller then proceeded a specified distance, the
large original exit motor starts to slow down. After the large original exit sensor has detected the trailing
edge of the original, the read motor stops rotating soon and the large original exit motor stops rotating
when the original has proceeded a specified distance. The large original exit solenoid turns OFF when
the large original exit motor stops rotating.
(10) Start of 2nd original back side registering
Same operation as (6)
(11) Start of 2nd original back side feeding
Same operation as (7)
JUNE 2002 © TOSHIBA TEC 16 - 15 e-STUDIO550/650/810 RADF